If an auto regressive moving average model (ARMA model) is assumed for the error variance, the model is a generalized auto regressive conditional heteroskedasticity (GARCH) .

learn more… | top users | synonyms

0
votes
1answer
29 views

What is the formula for variance in estimating exchange rate?

I was watching this Youtube Video. He used a exchange rates of Euro to Dollar for a few days and apply GARCH(1,1) to get the predicted price. However, I didnt understand variance that he calculates ...
2
votes
2answers
173 views

Forecast of volatility

What are the well known methods for forecasting (daily - weekly - monthly) volatility of a stock price? How about a bond price? Let's say I have in my disposition the price time series at a very high ...
1
vote
1answer
87 views

BEKK - GARCH model in Stata

Is it possible to run BEKK-GARCH in Stata? mgarch is of a different model type and google provide me with no good hints.
0
votes
0answers
17 views

VEC GARCH (1,1) for 4 time series

I have to estimate a VEC GARCH(1,1) model in R. I already tried rmgarch, fGarch, ccgarch, mgarch, tsDyn. Has somebody estimated a model like that? ...
1
vote
1answer
55 views

garchOxFit in R-oxo file does not match

Could someone please help me with trying to get the Ox interface to work in R. I get the following errors as output: This version may be used for academic research and teaching only Link error: ...
2
votes
2answers
77 views

Is there an implementation of VAR-EGARCH model in R or Stata?

I am writing my undergrad honor thesis and want to run a multivariable VAR-EGARCH model. Is there any package in R or formulas in Stata 14 that allows me to implement directly? If not, could you ...
1
vote
1answer
133 views

ARMA+GARCH prediction with package rugarch (R)

I am analyzing FTSE 100 series, from 2007-01-01 to 2010-12-31 (university exam homework). I have to use the data 'til 2010-11-30 as sample, and the remaining (23) observations as in-sample forecast ...
1
vote
0answers
36 views

Simulating returns from ARMA(1,0)-GARCH(1,1) model

I want to obtain a simulation of one-step ahead forecasts of stock returns process governed by ARMA(1,0)-GARCH(1,1) process. The returns are of form: $x_t = \mu + \delta x_{t-1} + \sigma_t z_t$ From ...
2
votes
1answer
43 views

How to implement dummy variables into GARCH(1,1) model from structural breaks (ICSS)

Hello everybody, I was already searching a lot of forums and read a huge amount of different papers. But I guess I am to stupid or I am at a loss. Hopefully some of you are able to help me out. Here ...
1
vote
0answers
35 views

How to fit exogenous + GARCH Model In Python?

I am studying a textbook of statistics / econometrics, using Python for my computational needs. I have encountered GARCH models and my understanding is that this is a commonly used model. In an ...
0
votes
0answers
42 views

Asset allocation and GARCH models

I am trying to solve an asset allocation problem and I am having some troubles grasping the concept. I am working with excess returns on 4 stock indices and I am obtaining the excess returns forecasts ...
5
votes
1answer
4k views

GARCH model and prediction

I have a question about the prediction of volatility and returns of a time series. Basically it is a question about prediction in the ...
0
votes
0answers
32 views

Forecasting conditional variance using fGARCH

I am forecasting the conditional standard deviation using ARMA(1,0)-GJRGARCH(1,1) in R using the fGarch package. Here is a sample code: ...
1
vote
1answer
43 views

One-step ahead forecast of a AR(1) process (GARCH context)

I am using a Matlab toolbox for obtaining one-step ahead forecasts of the conditional mean from the ARMA(1,0)-GARCH(1,1) process and I have encountered a piece of code that contains, in my opinion, a ...
1
vote
1answer
51 views

GARCH alpha equal to 0

I am estimating a GJR-GARCH(1,1) model with variance targeting in R. As data I am using returns on some stock indices. While calculating the GARCH models I obtain $\alpha=0$ for some indices. From ...
1
vote
0answers
51 views

Skewed Generalized Error Distribution's (SGED) pdf

I want to use the SGED distribution of Theodossiou for GARCH estimation, however, I am struggling to understand which is the correct pdf function of the distribution. Let me just say that the ...
6
votes
2answers
234 views

Does GARCH derived variance explain the auto-correlation in a time series?

Given a time series of $u_i$ returns where i=1 to t. $\sigma_i$ is calculated from GARCH(1,1) as $\sigma_i^2=w+\alpha u_{i-1}^2 +\beta \sigma_{i-1}^2$ . What is the mathematical basis to say that ...
0
votes
0answers
51 views

Forecasting conditional mean in ARMA-GARCH model (R/Matlab)

I am trying to forecast the conditional mean from a ARMA(1,0)-GARCH(1,1) model. The mean equation in my model is: $x_t = \mu + \delta x_{t-1} + h_t \epsilon_t$ where x is the variable (a return ...
0
votes
0answers
35 views

Skewed Generalized Error Distribution in GARCH modelling

I am trying to estimate GARCH models with the use of Theodossiou's (2000) Skewed Generalized Error Distribution. I am modifying matlab's ARMAX-GARCH-K toolbox to calculate this model. I am calculating ...
3
votes
1answer
58 views

Log-likelihood of skew-t distribution

I am trying to estimate GARCH models with the use of Hansen's (1994) skew-t distribution. I am using matlab's ARMAX-GARCH-K toolbox, where the log-likelihood is calculated as: ...
2
votes
0answers
41 views

When to use SV or a GARCH model

So i have been searching for this answer for a question if there is a rule or something that would say when to use GARCH type model or use an stochastic volatility model to predict the volatility of ...
3
votes
3answers
351 views

Any package to run VAR-GARCH or VECM-GARCH models in R?

I need to estimate a multivariate VECM-GARCH (or simply VAR-GARCH) in R. Browsing on the internet, I did not find anything yet. Do you know if such kind of packages exists? Please, note that a BEKK ...
6
votes
1answer
165 views

Density forecast of a GARCH model

I am currently working on developing a series of density forecasts and I am encountering some problems. I am working on weekly S&P 500 returns and the returns process is described as $r_{t} = ...
6
votes
2answers
190 views

What is the preferred GARCH method in practice?

My advance apologies, if this question is too naive or basic. Please be patient with my first experiences with SE; ask for clarification, if needed. I recognize there are many (often-criticized) ...
0
votes
0answers
31 views

CCC-Garch predict

So I'm trying to measure the VaR of 2 stock with a multivariate GARCH model, so im using the CCC model. I need to predict the standard-diviation and the mean but the ...
2
votes
1answer
184 views

High frequency price forecast model ARMA GARCH or another?

Can you reccomend model for high frequency data (1 second and less) (returns and volatility forecasting)? Most papers use ARMA, GARCH etc in 1 minute and lower time frame. PROBLEM ARMA does not know ...
4
votes
1answer
1k views

How to calculate the conditional variance of a time series?

I am reading a paper where the term conditional variance is mentioned, but I am not really sure what is meant by this and how this can be calculated: Fig. 2 shows the conditional variances of the ...
6
votes
2answers
196 views

Is it too important that my residuals be normal? I am Using an ARMA/GARCH model

I am trying to fit an ARMA/GARCH model to a time series. I found that the best candidate is an ARMA(1,0) + GARCH(1,1) with gaussian white noise It has coefficients with p-values near cero and the ...
2
votes
1answer
112 views

GARCH parameters

I'm trying to estimate parameters of GARCH(p,q) model. I tried p=1, q=1 with t-distribution errors. Ljung-Box showed no correlation in residuals and squared residual. But the null hypothesis that ...
0
votes
2answers
525 views

garchOxFit in R

Could someone please help me with trying to get the Ox interface to work in R. I followed the steps outlined in this paper (http://papers.ssrn.com/sol3/papers.cfm?abstract_id=1752095), but I get the ...
3
votes
0answers
949 views

FIGARCH estimation in R

I am trying to estimate a FIGARCH(1,1) model in R for Value-at-Risk purposes. As I understand it, the rugarch package does not support FIGARCH or FIEGARCH. To that end, I used the garchOxFit function ...
2
votes
2answers
169 views

Multivariate GARCH in Python

Is there a package to run simplified multivariate GARCH models in Python? I found the Arch package but that seems to work on only univariate models. I'd like to test out some of the more simple ...
2
votes
1answer
213 views

2-step estimation of DCC GARCH model in Python

Embedded in this thread are multiple questions. I'm currently im the process of implementing a DCC GARCH forecast model on quantopian (a python-powered trading platform). The two step consists of ...
3
votes
1answer
63 views

Expected value of log-GARCH process

Is there a way to analitycally compute expectation of log-GARCH process? The GARCH(1,1) process: $dU_t = \theta(\omega - U_t) dt + \xi U_t d W_t$ The log-GARCH(1,1) process: $e^{U_t}$ The ...
5
votes
1answer
148 views

Filtering out AR(1) effects before using stochastic volatility model

I wonder if I first filter out AR(1) (autoregressive model with lag 1) effects from univariate time series and then fit stochastic volatility model does above procedure introduce any bias at first or ...
3
votes
3answers
124 views

Could we estimate a portfolio's volatility using a GARCH on the portfolio returns?

Estimating the volatility of a portfolio is typically done by first estimating the covariance matrix. This, however, can be difficult to do accurately and predictivly. This paper gives a nice summary ...
3
votes
2answers
90 views

Autocorrelation in the GARCH model residuals

I am estimating GARCH model for volatility calculation and as a data input I have used log first difference data (ln(a)-ln(b)). Usually I would check for autocorrelation in residuals(to check the ...
2
votes
2answers
259 views

How to predict daily range of forex?

I am trying to predict the intraday moving range of stock/forex (essentially, high-low). Here are some ideas based on what I've been reading recently (do not have quant background, so basic level of ...
2
votes
3answers
1k views

How to trade volatility?

I am analyzing the volatility of financial stock returns and let's say I have a pretty good model to forecast tomorrows volatility of the stock returns. So let's say for simplicity reasons I have a ...
2
votes
0answers
35 views

Sum of two GARCH(1,1) Models

I have two GARCH(1,1) processes ($q=1,2$) $$ \sigma_{q,t} = \gamma_q + \alpha_q \, \sigma^2_{q,t-1} + \beta_q \, \epsilon^2_{q,t-1} $$ that have a constant correlation $\sigma_{12,t} = \rho \, ...
11
votes
0answers
2k views

Algorithm to fit AR(1)/GARCH(1,1) model of log-returns

I am fitting numerically an AR(1)/GARCH(1,1) process to index and stock log-returns, $r_t=\log(P_t/P_{t-1})$, where $P_t$ is the price at time $t$, and thus far am not clear on where the observed log ...
1
vote
1answer
55 views

When the two time series with different length, how could we analysis them with a bivariate GARCH model?

At this moment, i need to do the analysis of rouble/us dollars exchange rate and the stock market index in Russia, I prefer to do that in a multivariate GARCH model. However, I have a question about ...
3
votes
2answers
122 views

How to user GARCH(p,q) to identify most volatile sector?

I would like to ask help concerning the utilization of GARCH(p,q) models to identify volatility. Suppose that I have daily closing prices of 6 financial sectors spanning several years, and I am ...
2
votes
1answer
133 views

Forecasting using GARCH in R

I am using the predict and ugarchforecast functions in R. When I fit my models and try to forecast, I get either only increasing or decreasing values for sigma, does anyone know why? Thank you ...
1
vote
0answers
66 views

GARCH filtering and extreme value theory

We are evaluating a model for risk management based on extreme value theory using peaks over threshold and markov chain monte carlo methods. In doing this, we are firstly fitting a GARCH (we have ...
1
vote
0answers
57 views

GARCH estimation does not work, error in my returns?

Hey everyone and I hope that there are some smarter people out here that can help me out with my problem...: I have trouble with my implementation of a GARCH(1,1) model and I do not know how to move ...
10
votes
2answers
398 views

GARCH model, expectation of volatility?

Consider a time series $\{r_t\}$ following a standard GARCH(1,1) model, i.e., $$ r_t = \sigma_t \epsilon_t,$$ where $\epsilon_t \sim N(0,1)$ and are i.i.d, and $$\sigma_t^2 = \omega + \alpha_1 ...
2
votes
1answer
91 views

Garch models and assumption of stationarity ?

I found big inconsistency in the GARCH models and their underlying assumption of stationarity. GARCH models require that data must be stationary, where stationary means both mean and variance are ...
2
votes
0answers
120 views

Forecast of ARMA-GARCH model in R

I managed to forecast a GARCH model yesterday and run a Monte Carlo simulation on R. Nevertheless, I can't do the same with an ARMA-GARCH. I tested 4 different method but without achieving an ...
3
votes
1answer
88 views

Measure the effect of a natural disaster on a stock market index

I am very new to using stata and very new to using Garch models. I am currently doing my final dissertation for my MSc in Finance studies and regarding my topic I understood that i had to use garch to ...